Skip to content

Post Processing in 3D Printing

Post-processing is an often overlooked part of the 3D printing process. As the additive manufacturing market moves from prototyping to tools used in production or final/end-use parts geared toward consumer markets, the physical and chemical properties and appearance of 3D printed products is becoming increasingly important. That's where post-processing of 3D printed parts comes into play.

What is post-processing in 3D printing?
Parts manufactured with 3D printing technologies typically require some degree of post-processing after production. This important step in the 3D printing process is known as post-processing. In short, post-processing in 3D printing refers to any process or task that needs to be performed on a printed part, or any technique used to further enhance the object. Think of it as a finishing touch to treat and refine the parts coming out of a 3D printer. Options for post-processing 3D printed parts include removing support or excess material, washing and curing, or sanding or polishing a model.

Costs of post-processing 3D printed parts.
Post-processing can be expensive, especially when done by hand. Manual post-processing is labor-intensive and not scalable. It is also unsustainable in large series production.

The cost of post-processing can account for nearly one-third of the production cost of a 3D printed model. According to Wohler's 2018 report, 27% of a model's total production costs can be attributed to post-processing related costs, which include part breakage costs.

However, the recent development of various post-processing systems means that the task of finishing 3D printed parts can be automated and, as a result, will drive down costs.

Different companies are developing post-processing equipment to automate the process. For example, our partners at AM Solutions offer automated surface finishing, ranging from rough treatment of parts to remove supports to mirror-like surface polishing.

Note that the post-processing technique may vary depending on the printing process used to create the model. While a part printed in resin on a Rapid Shape 3D printer would need to be washed to remove excess resin, a part printed on a Markforged 3D printer might require little post-processing except removal of supports. A metal part printed on the Kurtz Ersa Alpha 140 3D printer would require heat treatment to bring the part to the desired hardness and remove thermal stresses from the part.

Filters

  • AM Solutions S1

    AM Solutions

    The AM Solutions S1 is a smart plug and play system which is easily to operate and allows powder removal and cleaning of your polymer parts after t...

    View full details
    Contact Us for Pricing
  • AM Solutions M1 Basic

    AM Solutions

    As a highly economical entry-level machine the compact and user-friendly M1 Basic machine by AM Solutions can be easily integrated into your manufa...

    View full details
    Contact Us for Pricing
  • $5,000.00

    Loctite 3D Printing EQ Washer DW11

    Loctite

    Loctite 3D Printing EQ Washer DW11   The Loctite® 3D Printing EQ Washer DW11 is a high-performance wash station specifically designed and engineer...

    View full details
    $5,000.00